Installation Electrician

Summary of Position
PowerConnect is looking for an experienced electrical technician (Wireman). The candidate will be responsible and should have the minimum electrical skill, knowledge, and background as stipulated below. The electrical technician does not design electrical systems but will be responsible for identifying potential risks and problems in the design.
To be successful as an electrical technician (wireman), the candidate should be able to read, understand, and draw electrical circuitry/systems. The candidate will be required to recommend improvements, calibrate instruments, and diagnose faulty equipment. The candidate will be responsible for installing and repairing complex electrical control, wiring, and lighting circuitry, working from a technical blueprint. To perform in this role, the candidate needs an electrical certification from a registered technical college and experience in the field working on simple and complex electrical systems.
Roles and Responsibilities (Commercial and others)
Electrical Installations

Install, maintain, and repair electrical control, wiring, and lighting systems.
Assemble and install electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
Test electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
Installation of conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
Inspect transformers, circuit breakers, and other electrical components.
Good knowledge of heating and air conditioning systems.
Connect wires to circuit breakers, transformers, or other components.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
Install ground leads and connect power cables to equipment, such as motors.
Construct and fabricate parts using hand tools and specifications.
Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects.
Fasten small metal or plastic boxes to walls to house electrical switches or outlets.

Electrical Maintenance and Repairs

Perform general electrical maintenance.
Circuit breaker corrective maintenance.
Troubleshoot electrical issues using appropriate testing devices.
Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
Maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.

Compliance

Can perform and issue Certificate of Compliance (CoC) Testing.
Maintain current electrician's license or identification card to meet governmental regulations.
Apply South African National Electrical Code and local building regulations.
Apply South African Occupational Health and Safety Regulations.

Team Supervision

Lead, direct, and train staff members to install, maintain, or repair electrical wiring, equipment, and fixtures.
Provide assistance during emergencies.
Ensure installations are completed on time and in accordance with the project plan, job schedule, and planned timelines.
Ongoing personal development and on-the-job training.
Supervising apprentice electricians.
Ensure that team members take care of and maintain their provided PPE kits.

Data Installations
Installing Cables

Identification of suitable cable routes on site (Planning).
Accurate measurement of routes (Limited cable wastage).
Understand the plan as communicated by Team Leader (Vision).
Understanding fibre optic cables and the practices of correctly installing fibre optic cable (Bend radius & figure 8).
Cables marked and labelled correctly before they are installed.

Network Points

Numbering and layout of network points is done logically.

Looming and Lacing

Basic understanding of the cable markings on the cable and their meaning (Copper & Fibre).
Cable looms are measured and cut accurately before they are installed.
Lacing of looms on trays and in ceiling boards is done correctly.
Spacing and tension of straps on looms are correct.
Exposed cable looms on Wall Mount Cable Trays are correctly laced.
Correctly lace and loom the Cabinet to the Patch Panel.

Skirting and Trunking

Correct selection and use of hand tools. Measure and cut with hacksaw. Use of Set Square. Spirit level.
Neatness and cleanliness of finished installation. Filling and touch up where required. Installation wiped clean.

Terminations

Clear understanding and identification of A & B Spec.
Termination of Patch Panels is done according to set specifications.
Accurately terminating to disconnect modules.
Correct termination of wall outlets. Understanding the implications of incorrect termination practices.
Cable skin distance, maintaining twists in pairs, cable pair nicks.
Correct mounting of wall outlets. Use the correct fastening material for the surface you are mounting on.
Wall Mount Cabinets are mounted securely and level.

Testing and Fault Finding

Able to do fault-finding, troubleshooting, and repairing of faults.
Basic tester reading, understanding the display. Identify a fault condition on the tester.
Able to test installations to Level 1 specifications, basic wire map, and length.
Use of markings on the cable to locate faults.

Administration
Electrical

Design and draw electrical circuitry.
Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
Read technical diagrams and blueprints.
Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
Advise management on whether continued operation of equipment could be hazardous and rectify the situation to ensure full operations.
Provide preliminary sketches and cost estimates for materials and services.
Perform business management duties such as maintaining records and files, preparing reports, and ordering supplies and equipment from designated procurement office.
Ordering of electrical supplies and equipment from ICS stores.
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment to complete work as per specifications.
Work from ladders, scaffolds, and roofs to install, maintain, or repair electrical wiring, equipment, and fixtures.
Good knowledge of various test equipment.

Company Property

The condition and maintenance of tools and equipment (drills, splice machines, testers, ladders, etc.) are safeguarded at all times. Tools/Equipment are not lost or damaged and are routinely maintained and cleaned.
Completeness of toolboxes and toolkits, including hand tools. Tools are not lost or damaged and used for the correct applications. Ensure that tool checklists are completed regularly.
Cleanliness and tidiness of company vehicle. Vehicles are not damaged (dents and scratches) and the necessary maintenance and upkeep is done.

Documentation and Processes

Responsible for ensuring the stock that has been issued is correct for the installation that needs to be completed (check stock before leaving the office).
Responsible for ensuring effective return of stock once an installation has been completed.
Ensure that timesheets are submitted for each Job timeously. Overtime correctly submitted.
Provide WhatsApp Updates on site arrival, departure, issues, and project status.
Complete and submit Vehicle Inspection Sheets.
Daily: Complete Vehicle Inspection Sheet.
Monthly: Submit all completed Vehicle Inspection Sheets and Travel Logs to the Fleet Adviser or Branch Manager.
Responsible for ensuring that H&S documentation (risk assessments and reporting near misses) is submitted continuously.
General care and maintenance of company PPE.

JOB REQUIREMENTS

Grade 12 or Equivalent Certification (NQF Level 4)
No Criminal record
Completed electrician apprenticeship.
At least 3 Years experience working as an electrician (Wireman).
Full understanding of SANS 10142-1 (Wiring of Premises)
Full understanding of OHS Act (Occupational Health and Safety)
Valid driver's license.
Electrical Certificate from a technical college (Any EW SETA certification).
Deep electrical system, power generation, blueprints, and maintenance and repair knowledge.
Knowledge and experience in Generator and UPS installations (Alternative supplies).
Knowledge and experience in renewable energy field (Solar, etc.).
Good communication skills.
Excellent problem-solving skills.
Must have inverter and solar knowledge.
Interpersonal and relationship management skills.
Analytical Skills.
Problem-solving skill.
Analyzing.
Coping with pressures and setbacks.
Adhering to the Powerconnect Systems principles and values.
Delivering results and meeting customer expectations.
Applying expertise and technology.

Job Types: Full-time, Permanent
Application Question(s):

What is your salary expectation?

Education:

Certificate (Required)

Experience:

Wireman: 3 years (Required)

License/Certification:

Red Seal (Required)

Location:

Cape Town, Western Cape (Required)

Expected Start Date: 2024/09/30
#J-18808-Ljbffr